搜索结果: 1-15 共查到“口腔材料学 Mechanical”相关记录23条 . 查询时间(0.126 秒)
Effect of chromium content on mechanical properties of casting Ti-Cr alloys
Mechanical property Titanium alloys Titanium casting
2010/11/30
The mechanical properties of a series of binary Ti-Cr alloys were investigated. Chromium content ranged from 5 to 20 mass%. Dumbbell- and disk-shaped specimens of each alloy were obtained by casting f...
A micro-mechanical evaluation of the effects of die hardener on die stone
Die hardener Nanoindentation Micro-scratching
2010/11/29
The purpose of this study was to investigate the properties of a die hardener penetrated layer and evaluate its protective effects on the surface of die stone. A commercial die hardener (PDQ die harde...
Effect of Thermocycling on Interfacial Gap-formation in Class V Cavities and Mechanical Properties of Spherical Silica Filler Addition to Resin-modified Glass Ionomer Restorations
Resin-modified glass ionomer cement Silanized spherical silica fillers Thermocycled condition
2009/9/15
The effects of thermocycling at 20,000 cycles and addition of silanized spherical silica filler (SF) on resin-modified glass ionomer cement (RMGIC) restorations were investigated. A RMGIC added with a...
Effect of Spherical Silica Filler Addition on Immediate Interfacial Gap-formation in Class V Cavity and Mechanical Properties of Resin-modified Glass-ionomer Cement
Resin-modified glass-ionomer cement Silanized spherical silica fillers Immediate condition
2009/9/14
The aim of this study was to investigate how the addition of silanized spherical silica filler (SF) would influence the formation of summed, immediate interfacial gaps in Class V tooth cavities. Resin...
Mechanical Properties of Woven Glass Fiber-Reinforced Composites
Mechanical property Glass fiber Composite
2009/9/14
The aim of this investigation was to measure the flexural and compressive strengths and the corresponding moduli of cylindrical composite specimens reinforced with woven glass fiber. Test specimens we...
Effect of Light Irradiation Time on the Mechanical Properties of Two Flowable Composites with Different Initiation Systems in Bonded and Unbonded Cavities
Flowable composite Mechanical properties Bonding
2009/9/14
The aim of this study was to evaluate the regional mechanical properties of flowable composites with different initiation systems under free and constrained conditions. Forty cavities fabricated in re...
Mechanical Behavior of Glass Ionomer Cements as a Function of Loading Condition and Mixing Procedure
Glass ionomers Mechanical properties Mixing systems
2009/9/14
With a view to comparing conventional (CGIC) and resin-modified glass ionomer cements (RMGIC) in terms of mechanical properties, these materials were subjected to different loading conditions for eval...
The Development of Ti Alloys for Dental Implant with High Corrosion Resistance and Mechanical Strength
Titanium alloy Corrosion Mechanical strength
2009/9/14
The corrosion behaviors of Ti and Ti-6Al-4V, Ti-6Al-7Nb, Ti-0.5Pt, Ti-6Al-4V-0.5Pt, and Ti-6Al-7Nb-0.5Pt alloys were examined using an electrochemical analyzer in artificial saliva containing 0.1 and ...
Effects of adding methacrylate monomers on viscosity and mechanical properties of experimental light-curing soft lining materials based on urethane (meth)acrylate oligomers.
Soft lining material Mechanical property Urethane oligomer
2009/9/14
We investigated the viscosity and mechanical properties of experimental light-curing soft lining materials based on six commercially available urethane (meth)acrylate oligomers. The viscosities of the...
Effects of mechanical and thermal aging on microleakage of different fissure sealants
Mechanical Loading Thermal Cycling Fissure Sealants
2009/9/14
The purpose of this study was to examine the microleakage of three different fissure sealants after they were aged by mechanical loading and thermocycling in vitro. To this end, a bonding agent (Prime...
Effect of tulle on the mechanical properties of a maxillofacial silicone elastomer
Color stability Aging Spectrophotometer
2009/9/14
The purpose of this research was to investigate if physical properties could be improved by incorporating a tulle reinforcement material into a maxillofacial silicone elastomer. A-2186 silicone elasto...
Effect of Aluminoborate Whiskers on Mechanical Properties of Polycarboxylate Cements
Polycarboxylate cement Whisker Mechanical property
2009/9/11
The mechanical properties of polycarboxylate cements containing 20 mass% of four kinds of aluminoborate whiskers with different fiber lengths and diameters were evaluated. Bending strength of the ceme...
Mechanical Properties of Dental Zirconia Ceramics Changed with Sandblasting and Heat Treatment
Zirconia Sandblasting Heat treatment
2009/9/11
Two types of tetragonal zirconia polycrystals (TZP), a ceria-stabilized TZP/Al2O3 nanocomposite (CZA) and a conventional yttria-stabilized TZP (Y-TZP), were sandblasted with 70-μm alumina and 125-μm S...
Effect of Polymorphism of SiO2 Addition on Mechanical Properties of Feldspathic Porcelains
Polymorphism of SiO2 Mechanical properties Coefficient of thermal expansion
2009/9/11
The present study aimed to investigate the effects of SiO2 polymorphism on the mechanical properties of feldspathic porcelains. Seven kinds of experimental feldspathic porcelains were prepared using c...
Mechanical and Thermal Cycling Effects on the Flexural Strength of Glass Ceramics Fused to Titanium
Flexural strength Aging Titanium
2009/9/11
This study evaluated the effects of mechanical and thermal cycling on the flexural strength (ISO 9693) of three brands of ceramics fused to commercially pure titanium (cpTi). Metallic frameworks of 25...